The cost
of refrigeration energy has been estimated at some 500 million per year and in
the food, drink, supermarket and cold storage sectors this will account for a
significant proportion of the site energy costs (ctg046_refrigeration_systems).
This
Carbon Trust report dated July 2011 estimated that refrigerated display
cabinets use a minimum of 5,800GWh per year. As a GWh is 1 million KWh then the
cost of this energy at current values will exceed £754m per annum and is a
significant drain on the UK resources.
There are
a number of ways in which this energy can be reduced but the most effective is
regular cleaning and maintenance which (according to the Carbon Trust) would
save up to 10% of the consumed energy.
In the
paper “ENERGY CONSUMPTION AND CONSERVATION IN FOOD RETAILING” published
by the Brunel University the author states “The
energy consumption of supermarkets will depend on business practices, store
format, product mix, shopping activity and the equipment used for in-store food
preparation, preservation and display. The electrical energy consumption can
vary widely from around 700 kWh/m2 sales area in hypermarkets to
over 2000 kWh/m2 sales area in convenience stores. The refrigeration
systems account for between 30% and 60% of the electricity used”.
Based
upon a unit cost of 0.10 per kWh and taking 30% as the total cost of the
refrigeration system then each m2 will cost 21.00 per hour. The
enormous amount of electricity required for supermarkets to run refrigeration
units makes up around 40-70% of their total energy expenditure, depending on
store size. It is also estimated that there are approximately 0.8 million
refrigerated display cabinets in the UK.
Additionally
a typical condenser will cost between £100 and 500.00 to clean and this essential
task must be completed to maintain compressor
efficiency and reduce failures.
Clogged
condenser coil. Only 1mm of dirt will cause a 21% drop in efficiency.
In the
Carbon Trust report the following message is regularly highlighted:
Good
practice inspections and maintenance saves energy and money
- Look out for debris/dirt build-up on the Condenser.
- Regularly clean condensers and evaporators.
- Cleaning a blocked condenser will improve compressor efficiency.
- Find out where your condensers are, and check them out.
- If they’re dirty or blocked with debris, they’re costing you money.
- Make sure the cleaning process doesn’t just push the dirt deeper between the fins.
And now
there is a simple way to maintain clean condensers which does not involve a
specialist technician and keeps the dirt from the fins.
An air
intake filter screen is designed to maintain airflow (resistance 1.25pa @ 0.50m/s)
whilst filtering out the dirt and debris that is drawn into a refrigerated
cabinet enclosure.
This
means that you can easily see any dirt build up and quickly remove it by
washing or vacuuming.
The
patented Permatron PreVent® screen is supplied with a magnetic frame so that
they can be easily simply removed when cleaning is required. For the Starbucks
case history please check out the RAB website www.rabse.com.
Air
intake screens are simple, innovative and hugely effective as they cut down the
cost of maintenance whilst keeping coils free of debris.
If you
could save 10% of your energy bill by spending a little would you give it a
try?
No comments:
Post a Comment
Comments are always welcome and we hope that our blogs provide sufficient content to enable you to join in.